The Gen-R is a key model for surf racing and all round paddling. The slightly recessed deck has been optimized to have great stability while easy-to-use when beach starting and getting back on the board. Lower rail height and reduced nose thickness is a much requested feature (especially from our lighter riders) for technical races, buoy turning and easy handling in choppy conditions.
The Gen-R is a great fit between the flat waterSprintmodel and open ocean/all roundAll Starmodel. Additionally, youth riders will love this board for its speed and ease of use.
Supboarder Rewiev Gen-R 14x25:
Gen R vs All Star by Fiona Wylde
FASTER ACCELERATION
The low nose rocker and narrow nose outline help increase the acceleration and overall efficiency on flat. This acceleration is essential for tech racing, beach starts and explosive sprints after buoy turns.
SOLID TURNING AND STABILITY FROM THE TAIL
The wider tail outline combined with the flat deck makes it very comfortable to move and be stable during the turn.
NEW SLICING NOSE
The narrow outline in the tip of the nose is intended to slice efficiently in flat water as well as on ocean bumps. The lower nose rocker shares genetics with the Sprint, extending the waterline for faster acceleration and prolonged glide. Although the low nose rocker aids in early bump detection, the rider must move back to trim while riding bumps.
NEW OPTIMISED NOSE VOLUME
The nose volume is designed to take on medium ocean chop and perform in technical racing, surf, and flat water. It is generally thinner than the All Star by approximately 4cm in thickness.
NEW SEMI-RECESSED DECK
The deck has been designed to have a slightly lowered standing tray for stability. At the same time, the side walls are low, making beach starts and getting back on the board much easier.
NEWROUND RAILS
The soft, round rails run the entire length of the board. This allows the board to be balanced in chop and predictable in surf and downwind. The round rails are wide for stability and balance.
NEWFLAT BOTTOM
The best bottom shape for a range of conditions, the flat bottom is fast in anything from surf to sprints. The flat bottom is very predictable to control in flat and ocean chop.
NEWWIDE TAIL
Features a wide tail with a sharp release. Turning is super easy on this model, and the wide tail also gives you great control in the surf.
NEWSINGLE DRAIN HOLE
The single center drain hole allows water from the semi-recessed deck to fully drain. Although hardly any water sits on the deck while paddling, the single center drain hole funnels excess water out of the cockpit. The recessed carbon scupper minimises any drag for a clean release.
NEWMULTIPLE HANDLE POSITIONS
The Gen-R is the technical/beach race specialist. Handles are modular with our screw in system to fine tune handle positioning.
NEW10” FIN BOX
The Gen-R is our first race model to feature the 10” fin box to fine tune rider fin preference. We have fitted the Gen-R with a larger box for adjustability. Short course racing would benefit from a fin further forward for fast turning, while longer races suit a fin further back in the box. Box placement varies for downwinding as some riders may prefer less or more tracking when surfing bumps.
NEWTHINNER PROFILE, LIGHTWEIGHT BUILD
One of the key design criteria for the Gen-R was the light weight, thinner profile technical race board. This much anticipated model is built to be a thinner model for faster acceleration, easy beach starting and great performance in surf and around buoy turns. The thinner profile also helps keep control in side wind and side chop.
NEWBUNGEE-TIE DOWN
Ensures a dry ride for your gear/ equipment/ luggage. Available in 14’0″ x 27″ and 14’0″ x29″
NEWPREPREG CARBON FIN
The 3k pre-impregnated carbon biax is an ultra-lightweight weave and creates super stiff performance throughout the fin. The trailing edge features a super sharp 0.4mm for clean hydrodynamics. The new range of fins adds speed and performance like never before.
NEWBOARD SOCK
Reduces paper waste while protecting your board from dust, scratches, and UV damage. Made with stretchable polyester, it fits various board shapes. Ensure optimal board maintenance with the iconic blue Board Sock, featuring a secure drawstring closure.
BOARD CONSTRUCTIONS
BLUE CARBON SANDWICH
LIGHTEST WEIGHT, DURABILITY, FLEX CONTROL
Super light-weight biaxial carbon is laminated over the standing area and full bottom.
While the stronger 150g Biaxial carbon wraps the nose and rail and the best strength ratio and efficient flex.
High-density PVC is used in the standing area and full bottom maximizing strength and long-term durability.
Designed for heavier riders up to 120 kg and lighter intermediate riders who want to get into the world of racing and take their performance to the next level. The 29” model is our highest volume and most stable Gen-R model, featuring an easy to use design, with a flat standing area for beach starts and easy recovery when falling in.
Available constructions:
• Blue Carbon
14’0” x 27”
Length: 14’0” / 427 cm
Width: 27” / 69 cm
Designed as the “go to board” for riders up to 110 kg, the Gen-R is designed for technical and surf racing and small chop. The flat standing area lets you tackle surf and small bumps with ease, and the 27” Gen-R is a fantastic model for intermediate racers and larger riders who want to up their speed around the course.
Available constructions:
• Blue Carbon Sandwich
• Blue Carbon
14’0” x 25”
Length: 14’0″ / 427 cm
Width: 25″ / 64 cm
The 25” will be one of our most popular Gen-R models because of its suitability for a range of riders in a variety of conditions. Riders up to 100 kg will love the Gen-R for surf and technical racing, small chop and semi-flatwater races. The thin profile, lightweight build is an exciting addition to the Starboard race range and is a much anticipated model for ocean and flat-water events, with faster acceleration, excellent surf performance and easy to use design for beach starts and buoy turns.
Available construction:
• Blue Carbon Sandwich
• Blue Carbon
• Lite Tech
14’0” x 23”
Length: 14’0” / 427 cm
Width: 23” / 58 cm
Suiting intermediate and elite riders, the 23” Gen-R is the much anticipated model for technical racing and small chop. The thin profile, flat deck design is a much loved concept for its ease of use in beach starts, easy turning around buoys – with the wide tail design – and its versatility from light bumps, surf racing and sprints. The 23” model is the flat deck racing board of choice for riders up to 90 kg.
Available constructions:
• Blue Carbon Sandwich
• Blue Carbon
14’0” x 21.5”
Length: 14’0” / 427 cm
Width: 21.5” / 55 cm
Our fastest Gen-R model, built in collaboration with numerous Dream Team athletes, the 21.5” is the board of choice for our world championships in small chop, technical racing and surf race events. After 7 prototypes of the 21.5” model, we have finally developed the best flat deck concept, with testing and rider feedback from numerous Dream Team riders.
Available constructions:
• Blue Carbon Sandwich
Payment in 24 installments:
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Don't forget your paddle. Starboard sup boards don't have paddle included because we are not all the same and we need different ones. There are plenty to choose from.